Marys Medicine

However, not everyone in Australia knows that drugs for potency levitra australia provide not just a temporary result, but also actually help rid the body of symptoms.

Data di stampa


Technical
Date of issue: 14 November 2008 CIVITANOVA MARCHE(MC) - ITALY - brand: MARMOLIT A. DESCRIPTION OF THE PREPARATION
The solid cream glue is a compound made of unsaturated polyester modified resin, dissolved in monomer styrene, to which is added an unsaturated polyester ortophtalic modified resin, condensed with standard glycol and pre-accelerated with hardener.
The preparation has good characteristics of chemical mechanical resistance, brightness and stability after hardening.
The solid cream glue is used for stuccoing and gluing of marble slabs, stones, agglomerated, travertine and so on… It can also be diluted with monomer styrene (5% - 10% in weight in the compound) in order to improve the spreading and impregnation on the marble surface. Further quantity of styrene can be added only upon a trial application, since some characteristics of the preparation can be affected.
Colouring pastes or similar pigments slightly affecting the colour toning of the preparation can also be added. B. TECHNICAL NOTES
CHARACTERISTICS OF PRODUCT
Aspect of product
11,7 – 12,4%
Viscosity (to 25°C)
> 2600 mPa*s-1
ASTM D 2515
Acid value
6,0 mgKOH/gr
ASTM D 2849
Residual to dry 105°C
Flash point
This document can't be reproduced in any of its parts without the previous consent of B-CHEM snc SOLID CREAM - MARMOLIT


Technical
Date of issue: 14 November 2008 CIVITANOVA MARCHE(MC) - ITALY C. PREPARATION OF THE SURFACE
Hardening catalysis
The solid cream glue hardens by adding benzoyl peroxide paste in a 50% ratio at a
room temperature between 10° and 40°C. As an alternative, MEKP catalyser is
available in order to improbe the hardening time and speed up the working process,
we suggest to add an accelerator A 150, previously checking eventual variations in
colour.
The surface to be treated has to be perfectly dry and free from dust and
grease.

D. WARNINGS
Application of the catalyst
We suggest to use the catalyser in a 2% ratio for a proper hardening; anyway
quantity can vary according to the conditions of use. Do not use quantities of
catalyst which are lower than 1% or higher than 3%.
Storage
Tins should be tightly sealed and stored in a cool, dry area.
Life of the product
If kept in its original, sealed container, at an ambient temperature of 25 °C, the
product has a shelf-life of twelve months.
E. FIELD OF USE
The preparation can be used for: • REINFORCING AND GLUING marble slabs and tiles and natural stones;
STUCCOING any type of marble slabs and manufactured articles and
CHEMICAL ANCHORING if charged with quartz.
This document can't be reproduced in any of its parts without the previous consent of B-CHEM snc SOLID CREAM - MARMOLIT



Technical
Date of issue: 14 November 2008 CIVITANOVA MARCHE(MC) - ITALY F. WORKING DATA
1-3% hardener in White paste at a 50%. Time of gel >5' to 22°C.
Application by spatula or small blade.
< 30' to 22°C.
G. SAFETY INFORMATION
See the safety specifications of the product.
H. ONLY FOR PROFESSIONAL USE
Always test the product before use.
Technical information and suggestions are based on our experiences. We guarantee a high quality
product. However, we are not responsible for results obtained when the product is used under
conditions beyond our control.

Specifications given by: B-CHEM snc snc VIA Enzo Ferrari, 25 - Industrial area A62012 CIVITANOVA MARCHE (MC) - ITALYTel. + 39 0733 801444, Fax + 39 0733 801062e-mail:- www.b-chem.net This document can't be reproduced in any of its parts without the previous consent of B-CHEM snc SOLID CREAM - MARMOLIT


Technical
Date of issue: 14/11/2008 CIVITANOVA MARCHE(MC) - ITALY − brand: MARMOLIT A. DESCRIPTION OF THE PREPARATION
The solid transparent glue is a compound made of unsaturated polyester modified resin, dissolved in monomer styrene, to which is added an unsaturated polyester ortophtalic modified resin, condensed with standard glycol and pre-accelerated with hardener.
The preparation has good characteristics of chemical mechanical resistance, brightness and stability after hardening.
It has a high adhesion on power to stone materials of natural origin (marble, granite) or synthetic origin (agglomerates in marble resin). The solid transparent is used as a glue for marble. It can also be diluted with monomer styrene (5% - 10% in weight in the compound) in order to improve the spreading and impregnation on the marble surface. Further quantity of styrene can be added only upon a trial application, since some characteristics of the preparation can be affected.
Colouring pastes or similar pigments slightly affecting the colour toning of the preparation can also be added. B. TECHNICAL NOTES
CHARACTERISTICS OF PRODUCT
Aspect of product
Solid compound
transparent
yellow-lemon colour
27 – 30%
> 2600 mPa*s-1
ASTM 2515
Acid value
3,9 mgKOH/gr
ASTM D 2849
Residual to dry 105°C
Flash point
This document can't be reproduced in any of its parts without the previous consent of B-CHEM snc SOLID TRANSPARENT - MARMOLIT


Technical
Date of issue: 14/11/2008 CIVITANOVA MARCHE(MC) - ITALY C. PREPARATION OF THE SURFACE
The solid transparent glue hardens at room temperature by adding benzoyl peroxide. As an alternative, MEKP catalyser is available. The working temperature of the preparation can affect the final hardening time of the glue.
In order to improve the hardening time and speed up the working cycle, we suggest the addition of the accelerator A 150.
The surface to be worked must be perfectly dry and free from dust and
D. WARNINGS
Application of the catalyst.
We suggest to use the catalyser in a 2% ratio for a proper hardening; anyway
quantity can vary according to the conditions of use. Do not use quantities of
catalyst which are lower than 1% or higher than 3%.
Storage
Tins should be tightly sealed and stored in a cool, dry area.
Life of the product
If kept in its original, sealed container, at an ambient temperature of 25 °C, the
product has a shelf-life of twelve months.
E. FIELD OF USE
The preparation can be used for: • STUCCOING AND GLUING of any type of marble slabs and manufactured
articles and natural stones. marble slabs and tiles and natural stones; • REINFORCING AND GLUING of marble slabs and tiles and natural stones
with or without glass-fibre or polyamide support; • CHEMICAL ANCHORING charged with quartz.
This document can't be reproduced in any of its parts without the previous consent of B-CHEM snc SOLID TRANSPARENT - MARMOLIT



Technical
Date of issue: 14/11/2008 CIVITANOVA MARCHE(MC) - ITALY WORKING DATA
1-3% hardener in White paste at a 50%. Time of gel >6' to 22°C.
Application by spatula or small blade.
< 35' to 22°C.
See the safety specifications of the product. H. ONLY FOR PROFESSIONAL USE
Always test the product before use.
Technical information and suggestions are based on our experiences. We guarantee a high quality
product. However, we are not responsible for results obtained when the product is used under
conditions beyond our control.

Specifications given by: B-CHEM snc VIA Enzo Ferrari, 25 – Industrial Area A
62012 CIVITANOVA MARCHE (MC) - ITALY
Tel. + 39 0733 801444, Fax + 39 0733 801062
-
This document can't be reproduced in any of its parts without the previous consent of B-CHEM snc SOLID TRANSPARENT - MARMOLIT Technical
Date of issue: 14 /11/2008 CIVITANOVA MARCHE(MC) - ITALY - brand: MARMOLIT A. DESCRIPTION OF THE PREPARATION
The fluid transparent glue is a compound made of unsaturated polyester orthophtalic modified resin condensed with standard glycol and pre-accelerated with hardener.
The preparation has good characteristics of chemical mechanical resistance, brightness and stability after hardening.
The fluid transparent glue is used for stuccoing and gluing of marble slabs, stones, agglomerated, travertine and so on… It can also be diluted with monomer styrene (5% - 10% in weight in the compound) in order to improve the spreading and impregnation on the marble surface. Further quantity of styrene can be added only upon a trial application, since some characteristics of the preparation can be affected. Colouring pastes or similar pigments slightly affecting the colour toning of the preparation can also be added. B. TECHNICAL NOTES
CHARACTERISTICS OF PRODUCT
Aspect of product
Liquid compound
transparent
light yellow colour
Resin Poliplast R 33.04
29 – 32%
Viscosity (to 25°C)
> 2600 mPa*s-1
ASTM 2515
1,160 gr/cm3
Acid value
9,1 mgKOH/gr
ASTM D 2849
Residual to dry 105°C
Flash point
This document can't be reproduced in any of its parts without the previous consent of B-CHEM Snc FLUID TRANSPARENT - MARMOLIT Technical
Date of issue: 14 /11/2008 CIVITANOVA MARCHE(MC) - ITALY C. PREPARATION OF THE SURFACE
The fluid transparent glue hardens at room temperature by adding benzoyl peroxide. As an alternative, MEKP catalyser is available. The working temperature of the preparation can affect the final hardening time of the glue.
In order to improve the hardening time and speed up the working cycle, we suggest the addition of the accelerator A 150.
The surface to be worked must be perfectly dry and free from dust and
D. WARNINGS
Application of the catalyst.
We suggest to use the catalyser in a 2% ratio for a proper hardening; anyway
quantity can vary according to the conditions of use. Do not use quantities of
catalyst which are lower than 1% or higher than 3%.
Storage
Tins should be tightly sealed and stored in a cool, dry area.
Life of the product
If kept in its original, sealed container, at an ambient temperature of 25 °C, the
product has a shelf-life of twelve months.
E. FIELD OF USE
The fluid transparent glue is a compound used as mastic for marble and
characterized by a fast hardening. It keeps a light and stable colour in time.
In marble gluing, it can be used pure or eventually charged with pigment.
Especially used for gluing glass fibre nets, for reinforcing slabs and tiles.
This document can't be reproduced in any of its parts without the previous consent of B-CHEM Snc FLUID TRANSPARENT - MARMOLIT Technical
Date of issue: 14 /11/2008 CIVITANOVA MARCHE(MC) - ITALY WORKING DATA
1-3% hardener in White paste at a 50%. Time of gel >5' to 22°C.
Application by spatula or small blade.
< 30' to 22°C.
G. SAFETY INFORMATION
See the safety specifications of the product. H. ONLY FOR PROFESSIONAL USE
Always test the product before use.
Technical information and suggestions are based on our experiences. We guarantee a high quality
product. However, we are not responsible for results obtained when the product is used under conditions
beyond our control.

Specifications given by: B-CHEM snc VIA Enzo Ferrari, 25 – Industrial Area A 62012 CIVITANOVA MARCHE (MC) - ITALY Tel. + 39 0733 801444, Fax + 39 0733 801062 - www.b-chem.net This document can't be reproduced in any of its parts without the previous consent of B-CHEM Snc FLUID TRANSPARENT - MARMOLIT Technical
Date of issue: 14/11/2008 CIVITANOVA MARCHE(MC) - ITALY - brand: MARMOLIT A. DESCRIPTION OF THE PREPARATION
The solid white glue is a compound made of unsaturated polyester modified resin, dissolved in monomer styrene, to which is added an unsaturated polyester ortophtalic modified resin, condensed with standard glycol and pre-accelerated with hardener.
The preparation has good characteristics of chemical mechanical resistance, brightness and stability after hardening.
The solid white glue is used for stuccoing and gluing of marble slabs, stones, agglomerated, travertine and so on… It can also be diluted with monomer styrene (5% - 10% in weight in the compound) in order to improve the spreading and impregnation on the marble surface. Further quantity of styrene can be added only upon a trial application, since some characteristics of the preparation can be affected.
Colouring pastes or similar pigments slightly affecting the colour toning of the preparation can also be added. B. TECHNICAL NOTES
CHARACTERISTICS OF PRODUCT
Aspect of product
Solid white
11,7 – 12,4%
Viscosity (to 25°C)
> 2600 mPa*s-1
ASTM D 2515
Acid value
6,0 mgKOH/gr
ASTM D 2849
Residual to dry 105°C
Flash point
This document can't be reproduced in any of its parts without the previous consent of B-CHEM snc SOLID WHITE - MARMOLIT Technical
Date of issue: 14/11/2008 CIVITANOVA MARCHE(MC) - ITALY C. PREPARATION OF THE SURFACE
Hardening catalysis
The solid white glue hardens by adding benzoyl peroxide paste in a 50% ratio at a
room temperature between 10° and 40°C. As an alternative, MEKP catalyser is
available in order to improbe the hardening time and speed up the working
process, we suggest to add an accelerator A 150, previously checking eventual
variations in colour.
The surface to be treated has to be perfectly dry and free from dust and
grease.

D. WARNINGS
Application of the catalyst
We suggest to use the catalyser in a 2% ratio for a proper hardening; anyway
quantity can vary according to the conditions of use. Do not use quantities of
catalyst which are lower than 1% or higher than 3%.
Storage
Tins should be tightly sealed and stored in a cool, dry area.
Life of the product
If kept in its original, sealed container, at an ambient temperature of 25 °C, the
product has a shelf-life of twelve months.
E. FIELD OF USE
The preparation can be used for: • REINFORCING AND GLUING marble slabs and tiles and natural stones;
STUCCOING any type of marble slabs and manufactured articles and
CHEMICAL ANCHORING if charged with quartz.
This document can't be reproduced in any of its parts without the previous consent of B-CHEM snc SOLID WHITE - MARMOLIT Technical
Date of issue: 14/11/2008 CIVITANOVA MARCHE(MC) - ITALY F. WORKING DATA
1-3% hardener in White paste at a 50%. Time of gel >5' to 22°C.
Application by spatula or small blade.
< 30' to 22°C.
G. SAFETY INFORMATION
See the safety specifications of the product.
H. ONLY FOR PROFESSIONAL USE
Always test the product before use.
Technical information and suggestions are based on our experiences. We guarantee a high quality
product. However, we are not responsible for results obtained when the product is used under
conditions beyond our control.

Specifications given by: B-CHEM snc snc VIA Enzo Ferrari, 25 - Industrial area A62012 CIVITANOVA MARCHE (MC) - ITALYTel. + 39 0733 801444, Fax + 39 0733 801062e-mail:- www.b-chem.net This document can't be reproduced in any of its parts without the previous consent of B-CHEM snc SOLID WHITE - MARMOLIT

Source: http://www.ferramenta.com.pa/Masillas_files/Mastic.pdf

Marine ecology progress series 530:119

Vol. 530: 119–134, 2015 MARINE ECOLOGY PROGRESS SERIES Published June 18 doi: 10.3354/meps11266 Mar Ecol Prog Ser Habitat and trophic ecology of Southern Ocean cephalopods from stable isotope analyses Miguel Guerreiro1,*, Richard A. Phillips2, Yves Cherel3, Filipe R. Ceia1, Pedro Alvito1, Rui Rosa4, José C. Xavier1,2