Marys Medicine

In second place among basic reasons for erectile dysfunction in Australia are different ailments levitra australia which may not necessarily be connected to the sexual sphere.

Iversen-trading.dk









TION PROGR
TÜV NORD Italia
M AN IDEAL
A A clear idea in mind:
TÜV NORD Italia
to design innovative
high-tech pumps with components and materials capable of
withstanding even the most testing and aggressive conditions.
Easy-to-install, high peformance pumps.
TION PROGR Reliable, long-lasting operation.
MORE THAN 30 YEARS AT YOUR SERVICE
THE QUALITY MANAGEMENT SYSTEM
Debem has been operating in the liquid transfer The certified Quality Management System is the
PRODUC sector for more than 30 years.
basic tool used by Management in establishing A pioneering business specialising in industrial pumps the Corporate Quality Policy, aimed at complete
for highly corrosive and aggressive applications.
Customer satisfaction and demonstrable ability to
provide products/services that meet Customer and The entire company philosophy hinges on close applicable regulatory requirements.
cooperation with the end user and customer
feedback, thus establishing a highly-effective The quality management system is certified to UNI EN
technological design and development system for ISO 9001 and for DEBEM represents a point of both
products and services that has gained the approval arrival and departure: of an increasing number of leading players in various ARRIVAL: because the corporate quality system is an
organisational and management tool developed in- DEPARTURE: because designing the quality system
has stimulated a phase of analysis that will lead to the establishment of new improvement and growth WAREHOUSE AND ASSEMBLY
A management system that controls the minimum
stock of every component and preassembled part of
all pumps in the catalogue means that when receiving an order Debem can advise product availability in real
time with fast assembly and certain delivery times.
CUBIC and BOXER
CUBIC and BO
MAIN FEATURES:
CUBIC mini diaphragm pumps, BOXER and FOODBOXER dia-
Available in PP, PVDF/ECTFE, ALUMINIUM and AISI 316
phragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with Use in potentially-explosive atmospheres
high apparent viscosity even if containing suspended solids. (ATEX zone 1-2 certification);
The stall-prevention pneumatic system assures a safe pump run-
Suitable for demanding applications and high-humidity
ning and it does not need lubricated air.
Self-priming dry capacity even with considerable suction head,
fine tuning of speed without pressure loss and the possibility
of dry operation without suffering damage mean that these
Actuated using non-lubricated air;
pumps offer unrivalled versatility. In addition, the huge choice of Stall-prevention pneumatic circuit;
construction materials allows selection of optimum chemical com- patibility with the fluid and/or environment without neglecting the Adjustable flow rate and head;
temperature range. They are specifically designed for demanding
Fine tuning of motor speed at constant pressure;
applications with high humidity or in potentially explosive at-
Twin-manifold option (two suction and two delivery);
mospheres (ATEX certification).
Bench or ceiling installation;
Three suction and delivery positions;
User-friendly maintenance and parts replacement;
Excellent performance and value for money.

II 2/2GD c IIB T135°C (zone1) II 3/3GD c IIB T135°C (zone2) Max. operating temperature:
PP min +3°C/max +65°C PVDF min +3°C/max +95°C Aisi 316 min +3°C/max +95°C The pumps must be installed vertically with special bolts on the
Alu min +3°C/max +95°C feet or holes provided.
Positive suction head
II 2/2GD c IIB T135°C (zona 1) II 3/3GD c IIB T135°C (zona 2) The plastic BOXER range is designed for the chemical industry's most demanding applications including highly-aggressive liquids Twin suction and
Twin suction manifold
Self-priming capacity: Max. head: 70m
30 ÷ 900 l/min
II 2/2GD c IIB T135°C (zona 1) II 3/3GD c IIB T135°C (zona 2) The metal BOXER range is designed for demanding applications throughout the paint sector and for solvent-based liquids.
Alu - AISI 316
Self-priming capacity: Max. head: 70m
30 ÷ 900 l/min
II 2/2GD c IIB T135°C (zona 1) CUBIC PUMPS
II 3/3GD c IIB T135°C (zona 2) This compact range with reduced footprint can be used in banks where space is at a premium.
PP - ECTFE
Self-priming capacity: A = ball valves
D = suction manifold
Max. head: 70m
B = pumping chamber
E = delivery manifold
5 ÷ 17 l/min
C1 = product-side diaphragm
F = pneumatic exchangers
C2 = air-side diaphragm
industrial pumps since 1982
FOODBOXER
II 2/2GD c IIB T135°C (zona 1) II 3/3GD c IIB T135°C (zona 2) A MAIN FEATURES:
Debem FDA Foodboxer pumps are made of electro-polished stain- Available in AISI 316 STAINLESS STEEL;
less steel, and are ideal for the food, cosmetics and beverage indu- Use in potentially-explosive atmospheres
stries in compliance with FDA requirements.
(ATEX zone 1-2 certification);
The parts in contact with the liquid are made exclusively of electro-polished AISI316 and PTFE FDA.
Suitable for demanding applications and high-humidity
GM PUMPS - FD Actuated using non-lubricated air;
HOW IT WORKS
Stall-prevention pneumatic circuit;
The compressed air introduced by the pneumatic exchanger (A)
Adjustable flow rate and head;
behind one of the two diaphragms generates compression and pushes the product into the delivery duct (B), at the same time the
Fine tuning of motor speed at constant pressure;
opposing diaphragm that is integral with the exchanger shaft cre- DIAPHR Twin-manifold option (two suction and two delivery);
ates a vacuum and intakes the fluid (C). Once the stroke has been
Bench or ceiling installation;
completed, the pneumatic exchanger diverts the compressed air behind the opposing diaphragm and the cycle is reversed.
Three suction and delivery positions;
User-friendly maintenance and parts replacement;

Excellent performance and value for money.
Max. operating temperature:
Aisi 316 min +3°C/max +95°C 3A certified, made with mechanically polished Aisi316, the
SANIBOXER pump is designed for the Food-Processing, Cosmetic
and Pharmaceutical industry.
GM PUMPS - 3A
The SANIBOXER pneumatic diaphragm pumps have been designed and built to pump liquid foodstuffs using materials that are compatible with the chemical substances used to clean and sanitize the pump. The pump may be used at operating temperatures (temperature of the fluid + environmental temperature) compatible with the pump materials and in any case never exceeding 95°C.
FAST EMPTYING SYSTEM
RA < 0,8µm
FOODBOXER
II 2/2GD c IIB T135°C (zona 1) II 3/3GD c IIB T135°C (zona 2) EQUAFLUX automatic diaphragm pulsation dampeners feature
Available in PP, PVDF, PPS-V, AISI 316, Alu
solid build and high performance. They are fitted to the discharge
line of diaphragm pumps in order to smooth pulsating flows and Automatic dampening control;
can be used with liquids having high apparent viscosity even if Suitable for demanding applications;
containing suspended solids of considerable size.
Use in potentially-explosive atmospheres (ATEX certifications);
EQUAFLUX dampeners automatically adapt to system conditions
without the need for manual adjustment or calibration.
Use in environments subject to high humidity;
The ability to minimise pulsations, vibrations and water hammer Actuated using non lubricated air ((2 ÷ 7 bar);
means that this component provides excellent protection and Range of construction materials ensures correct fluid
smooth system flow.
The huge choice of construction materials allows selection of optimum chemical compatibility with the fluid and/or environment User-friendly parts replacement and maintenance;
without neglecting the temperature range. Dampeners are also
Excellent performance and value for money.
available for use in potentially explosive atmospheres (ATEX
Max. operating temperature:
PP min +3°C/max +65°C PVDF min +3°C/max +95°C Aisi 316 min +3°C/max +95°C Alu min +3°C/max +95°C HOW IT WORKS
The compressed air entering the back-pressure chamber behind the diaphragm creates a pneumatic cushion that adjusts automatically A = expansion opening
to compensate the shock produced by the pressure pulse of the B1 = air-side diaphragm
fluid generated by the pump.
B2 = fluid-side diaphragm
C = automatic pneumatic valve
D = compressed-air chamber
Air supply:
Debem manufactured resin-encased horizontal centrifugal
Available in polypropylene, PVDF;
pumps are pumps operated by a direct-drive motor (max 3000
rpm) for fast fluid transfer and/or drainage with flow rates rang-
Positive suction head operation;
ing from 6 to 75 m3/h. Their special open-impeller design allows
Weldless;
pumping even with very dirty liquids having apparent viscosity
Mechanical bellows or lip seal;
up to 500 cps (at 20°C) and small suspended solids. There are
two versions available with different internal mechanical seal de- Usable even with extremely dirty liquids;
pending on use, TL (lip seal) and TS (bellows seal).
Flow rates: from 6 to 75 m3/h;
Head: up to 38 mt;
Quick and easy maintenance;

Inexpensive spares.
Viscosity: up to 500 cps
European voltage motors:

IP55 - F Class - 2-pole - 50 Hz - three-phase
AL CENTRIFUGAL PUMPS
single phase from 0,55 kw to 2,2 kw - 50/60 Hz
A = electric motor
B = inspection lantern
Temp. max. di esercizio:
C = mechanical seal
PP min +3°C/max +65°C D = impeller
PVDF min +3°C/max +95°C E = delivery duct
F = intake duct
TL = lip seal
TS = bellows seal
motor power
motor power
0.55 Kw - 0.75 HP industrial pumps since 1982
A couple of magnets leads the operation of the pump; the outer Available in polypropylene, PVDF;
magnet placed on the drive shaft transmits the motion to the inner Positive suction head operation;
magnet integrated with the impeller that is hermetically insulated. The pump impeller is not physically fixed to the drive shaft, seals are therefore eliminated and this consequently avoids leakages of High flow rates: from 5 to 35 m3/h;
the liquid drawn by the pump which are usually due to its wear and Quick and easy maintenance;
tear. The pump head is manufactured with few components, thus the maintenance of which becomes extremely easy. The materials used as standard are polypropylene (pp) and polyvinylidene fluo- There is no possibility of fluid leakage;
The pumps can't run dry. Dirty liquids can reduce the pump life.
Head: up to 24 mt;
Viscosity: up to 150 cps;

DM magnetic drive centrifugal standard IEC - IP 55 - CLASS F - 2 POLE - 2.900rpm
pumps should only be installed optional: three phase 230/400V 50/60 Hz
with the shaft positioned horizon- single phase 230V 50/60 Hz;
tally in a positive suction head ar- Max. operating temperature:
TIC DRIVE CENTRIFUGAL PUMP
Suitable devices should be fitted PP min +3°C/max +65°C to prevent dry running and the PVDF min +3°C/max +95°C formation of a vortex and possi- ble air suction. Horizontal centrif- ugal pumps should only operate WHILST FILLED.
2 Thrust bearing PTFE +
3 Bearing
5 Impeller
6 Pump Casing
7 bearing
1 - ALBERO CERAMICA ALLUMINA 97% 2 - REGGISPINTA GIRANTE PTFE + 30%GRAFITE 3 - BOCCOLA PTFE + 30%GRAFITE 4 - O-RING VITON/EPDM 5 - GIRANTE PP/PVDF+CF 6 - CORPO POMPA PP/PVDF+CF 7 - REGGISPINTA TESTATA CERAMICA ALLUMINA 97% These portable drum-transfer immersion pumps are designed to
Available in PP, PVDF e Aisi 316
pump corrosive liquids. Their special shape ensures that any spillages are collected in the Available with fully-interchangeable electric or pneumatic
Handles corrosive liquids;
motor, these pumps have an open impeller that allows continuous
pumping of clean corrosive liquids having apparent viscosity of
Viscosity up to 900 cps;
up to 600 cps with 500-watt electric and pneumatic motor (at
Available with either electric or pneumatic motor;
20°C) and 900 cps with 800-watt electric motor (at 20°C). TR-
ANSFER PUMPS
EL series pumps driven by an electric motor are also fitted with a Adjustable flow rate (pneumatic version);
safety cut-out switch that prevents accidental restart after a power No mechanical seals;
Easily dismantled;
Dip tube length = 900 mm or 1200 mm;
Flow rate up to 90 l/min.

Max. operating temperature:
PP min +3°C/max +65°C PVDF min +3°C/max +95°C AISI 316 min +3°C/max +95°C TR drum transfer pumps should only
be used with the shaft positioned
A = drive coupling
vertically and the pump immersed
B = motor ring nut
C = bearing
in the drum, whilst liquid must be
D = delivery duct
present. Running dry or with air
E = dip tube
bubbles can cause damage to the
F = PTFE bushing
G = impeller
internal shaft guide bushing.
H = suction port
* Standard electric motor single-phase 50/60Hz The IM series of resin-encased vertical centrifugal pumps features
Available in polypropylene, PP, PVDF;
high-performance pumps for fixed installations with pump immersed directly in the tank and operated by a direct-drive electric motor (max
Pump immersed in the tank;
3000 rpm) for fast fluid drainage with flow rates ranging from 6 to
Motor removable even with pump installed;
75 m3/h and head up to 38 mt.
Weldless;
The special design of this type of pump avoids the use of internal mechanical seals (subject to heavy wear) and ensures that any Usable even with extremely dirty liquids;
accidental spillages are collected in the tank.
High flow rates: from 6 to 75 m3/h;
The open impeller allows continuous pumping even with very dirty liquids having apparent viscosity of up to 500 cps (at 20°C) and
User-friendly bushing replacement;
small suspended solids.
Quick and easy maintenance;
The choice of pump construction materials allows selection of Also available without motor;
optimum chemical compatibility with the fluid and/or environment without neglecting the temperature range.
Max. head: 7,2 ÷ 38 m
Viscosity: up to 500 cps

AL CENTRIFUGAL PUMPS
European voltage motors: IP55 - F Class - 2-pole - 230/400 V
50/60 Hz - three-phase
single phase from 0,55 kw to 2,2 Kw - 50/60 Hz
Column length (L): 500/800/1000/1250 mm

motor power
(other sizes available on request)
Max. operating temperature:
0.55 Kw - 0.75 HP PP min +3°C/max 65°C PVDF min +3°C/max 95°C A = electric motor
B = drive coupling
C = lantern
D = radial bearing
E = outer column
F = shaft sleeve
G = ceramic bushing
H = impeller
I = delivery duct
L = intake duct
M = bushing
TING BASKE
T STRAINERS
The large passage surface of the basket makes these filters particularly suitable to be installed on the suction head of the pumps, protecting them from suspended solids, impurities and foreign bodies without causing excessive pressure loss. MAIN ADVANTAGES: - easy to inspect and remove basket - operating pressure of 1 bar. DELIVERY 3" GAS For the chemical industry, water purification, fish farming, galvanizing, tanning, textile, paper, and printing industries and a host of other industrial applications. Available in connection sizes of 1" ½ F, 2" F, 2" ½ F, 3" F.
DELIVERY 3" GAS industrial pumps sinc
DESCRIZIONE REVISIONI e 1982FIRMA APP. REV DATA
QUOTA SENZA INDICAZIONE DI TOLLERANZA SECONDO NORMA ISO 2768-m DISEGNO DI PROPRIETA' RISERVATAPROTETTO A TERMINI DI LEGGE.
E' ASSOLUTAMENTE VIETATA LA RIPRODUZIONE E LA VISIONE A TERZI DESCRIZIONE REVISIONI QUOTA SENZA INDICAZIONE DI TOLLERANZA SECONDO NORMA ISO 2768-m DISEGNO DI PROPRIETA' RISERVATAPROTETTO A TERMINI DI LEGGE.
E' ASSOLUTAMENTE VIETATA LA RIPRODUZIONE E LA VISIONE A TERZI petrochemical, food, mechanical, environmental, printing, chemical, painting, galvanic, textile and ceramic industry
DEBEM IN THE WORLD
NORTH AFRICA
MIDDLE EAST
TÜV NORD Italia
DEBEM s.r.l.
via Del Bosco 41

21052 Busto Arsizio (Va) - Italy
tel. +39 0331 074034
fax +39 0331 074036
www.debem.it - info@debem.it

Source: http://www.iversen-trading.dk/wp-content/uploads/2014/06/Debem-Brochure.pdf

A herbal formula, comprising panax ginseng and bee-pollen, inhibits development of testosterone-induced benign prostatic hyperplasia in male wistar rats

King Saud University Saudi Journal of Biological Sciences A herbal formula, comprising Panax ginseng andbee-pollen, inhibits development of testosterone-induced benign prostatic hyperplasia in male Wistarrats Hyun Kyung Park , Su Kang Kim ,, Sang Won Lee , Joo-Ho Chung Byung-Cheol Lee , Sae Won Na , Chun Gun Park Young Ock Kim a Kohwang Medical Research Institute, School of Medicine, Seoul 130-701, Republic of Koreab Development of Ginseng and Medical Plants Research Institute, Rural Administration, Eumseong 369-873, Republic of Koreac Department of Internal Medicine, College of Oriental Medicine, Seoul 130-702, Republic of Koread Department of Veterinary Internal Medicine, College of Veterinary Medicine, Konkuk University, Seoul, Republic of Korea

Draft guidance for industry drug interaction studies — study design, data analysis, and implications for dosing and labeling

Guidance for Industry Drug Interaction Studies — Study Design, Data Analysis, and Implications for Dosing and Labeling DRAFT GUIDANCE This guidance document is being distributed for comment purposes only. Comments and suggestions regarding this draft document should be submitted within 60 days of publication in the Federal Register of the notice announcing the availability of the draft guidance. Submit comments to the Division of Dockets Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, rm. 1061, Rockville, MD 20852. All comments should be identified with the docket number listed in the notice of availability that publishes in the Federal Register. For questions regarding this draft document contact (CDER) Shiew-Mei Huang, 301-796-1541, or (CBER) Toni Stifano, 301-827-6190.